BACnetStack_SetIntrinsicSignedOutOfRangeAlgorithm

bool BACnetStack_SetIntrinsicSignedOutOfRangeAlgorithm(
  const uint32_t deviceInstance,
  const uint16_t objectType,
  const uint32_t objectInstance,
  const int32_t lowLimit,
  const int32_t highLimit,
  const uint32_t deadband,
  const bool enableLowLimit,
  const bool enableHighLimit,
  const uint32_t timeDelay,
  const bool useTimeDelayNormal,
  const uint32_t timeDelayNormal,
  const bool enable);

Datatype-swap variant of BACnetStack_SetIntrinsicOutOfRangeAlgorithm() for a SignedInteger-valued Present_Value (e.g. an integerValue object).

See that function for the full parameter semantics; lowLimit/highLimit are signed to match the monitored datatype.

The object must exist and have alarms and events enabled by BACnetStack_SetAlarmsAndEventsForObjectEnabled(…, enabled=true) - an Event Enrollment object carries its own and needs no such call; otherwise this returns false.

BACnet reference: ANSI/ASHRAE 135-2024 clause 13.3.14 (SIGNED_OUT_OF_RANGE Event Algorithm).

Parameters

Parameter	Direction	Description
`deviceInstance`	in	The instance number of the device that owns this object.
`objectType, objectInstance`	in	The object for alarms and events: one BACnet Object Identifier, carried as two parameters (see the API conventions).
`lowLimit`	in	The bottom of the normal band.
`highLimit`	in	The top of the normal band.
`deadband`	in	The margin by which the value has to come back inside the exceeded limit before the event state returns to normal.
`enableLowLimit`	in	Whether to enable the low limit to the algorithm (true) or not (false).
`enableHighLimit`	in	Whether to enable the high limit to the algorithm (true) or not (false).
`timeDelay`	in	How long, in seconds, an offnormal condition has to persist before the event state changes to offnormal.
`useTimeDelayNormal`	in	Whether to use a different time delay value for the timeDelayNormal, or just use the timeDelay value.
`timeDelayNormal`	in	How long, in seconds, a normal condition has to persist before the event state returns to normal.
`enable`	in	Initial inhibit state, inverted - NOT a remove. true arms the algorithm; false leaves it armed but INHIBITED through the object’s Event_Algorithm_Inhibit property (or Reliability_Evaluation_Inhibit for a fault algorithm). Both of those properties are made WRITABLE by BACnetStack_SetAlarmsAndEventsForObjectEnabled(), so a remote client can change the state afterwards. To genuinely remove an armed algorithm, disable the object with BACnetStack_SetAlarmsAndEventsForObjectEnabled(…, enabled=false). Recommended value: true

Returns

True on success; false if the device or object does not exist, the object type does not support this algorithm, or Alarm-and-Event support was not compiled (STACK_OPTION_ALARMS_AND_EVENTS).

Topic: Alarms and events. Declared in CASBACnetStackDLL.h.